logigamesFR

Slitherlink

A single loop, guided by numbers.

Difficulty
Daily puzzle

Generating the grid…

How to play
  • Draw a single closed loop by joining the dots, with no crossings or branches.
  • Each number tells how many of its cell’s four sides belong to the loop. Numbers are not necessarily on the loop: a numbered cell can be inside or outside.
  • Cells without a number are unconstrained. Crosses on excluded edges help you deduce the rest.
  • Tap an edge to draw, a second time for a cross, a third time to clear; drag to keep going. Right click: cross.
  • With the keyboard: arrow keys to pick an edge, Enter to draw, X for a cross.

Slitherlink rules in detail

Slitherlink is a loop puzzle played on a lattice of dots. Your goal is to connect neighboring dots with horizontal and vertical lines so that they form one single closed loop. Lines always run along the edges of the cells, never diagonally.

The loop never crosses itself and never branches: each dot is either visited once or not at all. It does not have to pass through every dot or touch every cell. Two separate loops are not allowed either: when you are done, every line you drew belongs to one circuit.

Some cells contain a number. It tells you how many of that cell’s four sides are part of the loop: a 0 has none, a 3 has three. A blank cell gives no information, so the loop may use anywhere from zero to four of its sides. A numbered cell can end up inside or outside the loop.

Slitherlink techniques

Every puzzle can be solved by pure logic, with no guessing. These are the deductions you will use most, from the simplest to the more subtle.

  • Zeros: None of its four sides is part of the loop. Cross them all out right away.
  • Zero or two lines per dot: A dot is either skipped or passed through, so it touches exactly zero or two lines. Once a dot has two lines, its other edges are out. A line that reaches a dot with only one open edge left must take it. A dot with every edge but one crossed out cannot be used, so that last edge is out too.
  • Satisfied or starved numbers: When a number already has all its lines, cross out its remaining sides. When it has exactly as many open sides as it still needs, draw them all.
  • A 3 next to a 0: The shared side is ruled out by the 0, so the other three sides of the 3 are all drawn.
  • Two adjacent 3s: The side they share is drawn, along with the two outer sides parallel to it. The short edges that extend the shared side on either end are crossed out.
  • Two diagonal 3s: For each 3, the two sides forming its outer corner, the one facing away from the other 3, are drawn.
  • A 3 in a corner of the grid: Both sides along the corner are drawn. If one were missing, the other would run into the corner with no way out.
  • A 1 in a corner of the grid: Both corner sides are crossed out. Drawing one would force the other, which would give the 1 two lines.
  • No premature loops: Never close a small loop while other lines or numbers still need the loop elsewhere. If an edge would join the two ends of the same path too early, cross it out.

On harder grids these patterns are not always enough. You then have to look at every way the loop can pass the four corners of a cell, taking the neighboring numbers into account, and keep only what holds in every case.

Tips for beginners

Use crosses generously. Knowing where the line cannot go is just as useful as knowing where it goes: every cross narrows the options at nearby dots and often unlocks the next deduction.

Start with the 0s, then the 3s and any numbers sitting on the border or in a corner. After that, follow the loose ends of your line segments. A line end always has to continue, and it usually has only one or two directions to choose from.

Stuck? The Hint button (H key) suggests a move with an explanation, or points out lines and crosses that contradict the solution. Undo (Ctrl+Z) and crosses are free, so feel free to experiment.

How the difficulty levels differ

  • Easy: 5×5 grid with a number in more than half of the cells. The basic rules are enough (number counts and zero or two lines per dot), with the no-premature-loop rule needed at most once.
  • Medium: 7×7 grid with fewer numbers. At least a few steps call for a local analysis around a cell, beyond simple counting.
  • Hard: 10×10 grid where roughly one cell in five to one in two has a number. It needs many local analyses, and the loop covers a much larger area.

Each puzzle is generated on our server and then solved by a program that is not allowed to guess. That is how we prove the solution is unique and measure how hard the grid really is.

Where Slitherlink comes from

Slitherlink is a classic pencil-and-paper puzzle, popularized by Japanese puzzle publishers in their books and magazines. You may also see it under other names, such as Fences or Loop the Loop.

Frequently asked questions

Does the loop have to go through every number?

No. A number only says how many sides of its cell are drawn. A 0 is never touched by the loop, and a numbered cell can sit inside or outside it.

Does every puzzle have a single solution?

Yes. Every grid is checked before you get it: only one loop fits, and you can reach it entirely by logic.

Can I play with a keyboard?

Yes. Arrow keys move the selection from edge to edge, Enter draws a line (then a cross, then clears it), X toggles a cross and Delete clears an edge. H asks for a hint and Ctrl+Z undoes your last move.

Can I finish a puzzle later?

Yes. Your current game is saved automatically in your browser, one per difficulty level. Come back to the page in the same browser to pick up where you left off.

How is the score calculated, and is it free?

The game is free and requires no sign-up. Your score is calculated by the server when you win, based on the difficulty you picked, how hard the grid actually is, your playing time, the hints you used and how many times you restarted. Undoing moves and placing crosses are never penalized.